Prepare your bait and clean your catch effortlessly with our range of premium Bait Boards. Manufactured from high quality stainless steel, enhancing the boards performance when exposed to the harsh marine, fishing and boating environment.


Our range of Bait Boards are manufactured by Cookout BBQ's and are a great fishing accessory for your boat.

They are built with a high quality 316 marine grade stainless steel frame and strong, durable plastic cutting board made from HDPE (High Density Polyethylene) long lasting plastic, which is a safe plastic for food contact.

HDPE plastic is corrosion, germ and bacteria-resistant and will withstand just about anything.

Easy To Use

With a variety of different mounting options available our Bait Boards are easy to install.

All mounting options are interchangeable with the entire range of our Bait Boards, allowing you to achieve your ideal position with any board.

Depending on your requirements, you can mount your Bait Board on:

  • Flush Deck Mounts - Once the deck mounts are installed, simply slide in the 1 inch (25.4mm diameter) posts and sit your Bait Board onto the posts
  • Clamp On Rail Mounts - Our clamp on mounts come with clamps to suit the following size rails. Simply clamp the mounts to your existing rail and sit your Bait Board onto the mounts
    • 1 inch (25.4mm diameter)
    • 1.25 inch (32mm diameter)
    • 1.5 inch (38mm diameter)
    • 2 inch (50mm diameter)
    • 2.5 inch (63mm diameter)
  • Removable Pins - Our removable pins are manufactured from solid 316 marine grade stainless round bar. They have a 12mm diameter pin designed to drop through your existing stainless steel rail with a 25mm diameter upright to fit into your Bait Board. Installation requires a piece of 16mm x 1.5 diameter tube to be fabricated into your existing rail. This piece of tube can be supplied free or charge at your request when ordering the pins. The pins include a removable r-clip which secure the pin through the rail. The pins can be removed from the rail when the Bait Board is removed.
  • Welded Pins - These would be fabricated to the rail by a local fabrication company, if your vessel is on the Gold Coast we can provide this service.

Effortless Cleaning

Our Bait Boards feature an easy to clean design, simply hose down and wash with warm soapy water.

With a fully welded construction our design avoids corrosion and build-up of unwanted mess around the cutting surface without compromising on strength and durability of the Bait Board.

Australian Made

Our Bait Boards are proudly Australian made and built at our Gold Coast manufacturing facility in Ormeau, Queensland.

We design, manufacture and install locally, servicing all of South East Queensland.

If your installation location is not located in South East Queensland, we can recommend a qualified and reputable installer.

View our Bait Board Range


Our standard range of Bait Boards are available to purchase online

Image Gallery

Range of Bait Boards

Tubular Bait Board with Rod and Drink Holders (SS014)

Constructed from 316 stainless steel these bait boards are fully electropolished and include an HDPE cutting board, hook/sinker tray at the rear and two drink holders for the all-important beverages. The upright rod holders on the rear of the bait board allow for a fishing rod to sit in the upright position for easy baiting, while the angle rod holders are great for trawling. (Mounts not included. Requires flush deck or rail mount accessory)

Dimensions: 870 x 300 x 400 (mm). Weight: 8.9kg.

Apprentice Bait Board (SSJBB)

Cookout Apprentice Bait Board, constructed from quality 316 marine grade stainless steel and electropolished frame with a HDPE cutting board. A perfect accessory to complement your Cookout BBQ. 

Dimensions: 450 x 300 x 170 (mm). Weight: 3.6kg.

Barracuda Bait Board with Rod Holders (SS001/1)

Our Barracuda Bait Board is constructed of 316 marine grade stainless steel, fully electropolished featuring HDPE cutting board and 4x rod holders, perfect for the keen fisher.

Dimensions: 930 x 660 x 250 (mm). Weight:

Sheet Bait Board (SS0012, 13)

Cookout sheet Bait Boards are made of 316 marine grade stainless steel and fully electropolished. Available in two mounting options Classic or Deluxe. (Mounts not included. Required rail or flush deck mount accessory)

Dimensions: 680 x 430 x 160 (mm). Weight: 7kg.

Bait Board Specifications


  • 316 Marine Grade Stainless Steel
  • Fully Welded Stainless Frame
  • HDPE (High Density Polyethylene) Plastic Cutting Board


Mounting Options

  1. Flush Deck Mounts
  2. Clamp On Rail Mounts (19mm, 25mm, 38mm or 50mm diameter clamps)
  3. Removable Pins
  4. Welded Pins

Mounting Centres

  1. Classic = 464mm
  2. Deluxe = 613mm


Our standard range of Bait Boards are available to purchase online

Custom Bait Boards

Our premium Bait Boards make cutting or cleaning fish easy.

If our range of Bait Boards (full range listed below) don't suit your specific fishing requirements we also specialise in modifying and custom Bait Board fabrication.

This can include, but not limited to:

  • Larger or longer boards
  • Additional drink holders
  • Extra rod holders
  • Add draws and/or shelves
  • Or any other design addition you may require

Custom Bait Board Gallery

Have a Question?

Have a question or query about our Bait Boards?

Please complete our enquiry form below and one of our team members will be in touch shortly.

Fields marked with * are required